Pasting Strokes
Pastes the content of the clipboard when it contains strokes that have been cut or copied.
1. Touch [Paste] and touch the place on the screen to paste the cut or copied stroke.
You can perform this operation successively. Also, dragging the pasted stroke continuously,
you can move it.
2. Enlarge, reduce, or move the figure or stroke as you want.
For details, see page 41 "Enlarging, Reducing, or Moving the Strokes".
• The cut or copied strokes are saved temporarily until one of the following operations is performed:
• Another stroke is cut or copied.
• The machine is shut down.
• The machine enters standby mode.
• The whiteboard is closed.
• A remote whiteboard in compatible mode is opened.
Changing the Display Magnification/Moving the Display Area
There are two methods for changing the display magnification of a displayed page or moving the
display area of an enlarged page. The first is to use your fingers, and the second is to use the pen.
• When hosting or participating in a remote whiteboard session, the result of the operation you
perform is applied to all the devices.
Changing the display magnification using your fingers
When you change the display magnification or move the display area with your fingers, a zoom
navigator appears in the top center of the screen. The zoom navigator shows the area displayed on the
screen.
2. Using a Whiteboard
44
To Next Page
Loading...
