Ricoh D5510 - Using the Application Linking Function

Using the Application Linking Function
Applications that were installed separately can be added to the whiteboard. When an application is
added, an icon is added to the main operation panel. For the procedure to add applications, see the
Ricoh website or consult your service representative.
• You may not be able to use all the functions and some of the functions you can use may be limited,
depending on the application. For applications that we recommend you add, see the Ricoh website
or consult your service representative.
Starting the application
Start the application from the whiteboard by performing either of the following:
• Touch on the main operation panel
• Select the menu on the sub-panel after touching on the main operation panel
Depending on the settings, you can change the application icon that is displayed on the main
operation panel when adding the applications. For details, ask the operator who added the
application to the machine.
Selecting the menu for the operation you want to perform
Start the application from the menus on its sub-panel. Depending on the application, you can
change the menus which are displayed on the sub-panel. For details, ask the operator who added
the application to the machine.
• The menu to open the software keyboard is displayed at the bottom of the sub-panel.
• The interactive pen operates in the same manner as the touch pen does while the software
keyboard is displayed.
10. Appendix
254