2. Slowly remove the pen bottom from the interactive pen body so that the inserted pushpin
does not detach from the pen bottom.
3. When the pen bottom is removed from the interactive pen body, insert and press the new
pen bottom straight onto the pen body.
Do not twist when pressing the pen bottom. This might cause the pen bottom to break.
Cleaning the Display
• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
If the display surface or the inside of the display frame of the whiteboard becomes dirty, clean it with a
soft dry cloth.
If the display is used without cleaning, a position touched on the display may not be recognized
correctly.
Maintenance
257
To Next Page
Loading...
