What to do if an abnormal sound is heard from Ricoh Interactive whiteboard?
If an abnormal sound is heard from the area surrounding the output/input terminals on the back of the display of your Ricoh Interactive Whiteboard, quickly press and release the power button. When the machine turns off, contact your service representative.
What to do if a fatal error has occurred on Ricoh Interactive whiteboard?
If a fatal error occurs on your Ricoh Interactive Whiteboard, and the message appears because the power cable was disconnected to force shutdown, quickly press and release the power button to turn off the machine, then press it again to restart. If the error persists, it is recommended to contact your service representative.
What to do if a communication failure has occurred on Ricoh Interactive whiteboard?
If your Ricoh Interactive Whiteboard displays a communication failure message, save the page you're working on if needed. Then, quickly press and release the power button to turn off the device. Once it's off, press the power button again to restart the Interactive Whiteboard.
What to do if nothing more can be entered on Ricoh Interactive whiteboard?
If your Ricoh Interactive Whiteboard displays a message indicating that nothing more can be entered, it means the maximum number of entries on the whiteboard has been reached. This is because you have reached the limit of 90,000 strokes, fair copy entry text, figures, and stamps on all pages. Delete any unnecessary strokes, fair copy entry text, figures, and stamps, and then try again.
What to do if a stroke is not displayed at the correct position on Ricoh Interactive whiteboard?
If a stroke is not displayed at the correct position on your Ricoh Interactive Whiteboard, clean the display. If the problem persists, contact your service representative.
Why a stroke is suddenly displayed in an unintended direction halfway on Ricoh Interactive whiteboard?
If a stroke is suddenly displayed in an unintended direction halfway on your Ricoh Interactive Whiteboard: * Keep anything other than your finger from touching the display. * Be careful not to apply too much stroke pressure. * Do not apply too much force to the display. If the problem persists, contact your service representative.
What to do if the number of handwritten entries exceeds the limit on Ricoh Interactive whiteboard?
If the number of handwritten entries exceeds the limit on your Ricoh Interactive Whiteboard, delete unnecessary pages containing strokes and delete unnecessary strokes.
What to do if cannot use the host name on Ricoh Interactive whiteboard because the DNS server is not set?
If you cannot use the host name on your Ricoh Interactive Whiteboard because the DNS server is not set, configure the DNS server in the Network Settings of Administrator Settings.
Why is only a monochrome image displayed on Ricoh Interactive whiteboard?
If your Ricoh Interactive Whiteboard displays only a monochrome image, reconnect the cable and ensure the correct cable is used. If the problem persists, contact your service representative.
What to do if the power button is pressed, but the system does not start up on Ricoh Interactive whiteboard?
If the power button is pressed on your Ricoh Interactive Whiteboard, but the system does not start up and the power lamp does not turn on, reconnect the power cable.
General| Brand | Ricoh |
|---|---|
| Model | D2200 |
| Category | Interactive whiteboard |
| Language | English |
To Next Page
