Ricoh D2200 - When Synchronizing Device Settings

When Synchronizing Device Settings
Problem Causes Solutions
Settings cannot be defined
in Device Configuration
Management.
• The [Use Synchronous
Function on Device
Configuration] check
box is selected, and the
factory default
password is specified in
[Administrator
Password of
Synchronization
Source Whiteboard].
• The [Use Synchronous
Function on Device
Configuration] check
box is selected, and
either [Whiteboard
Address of
Synchronization
Source] or
[Administrator
Password of
Synchronization
Source Whiteboard] or
both of them are not
specified.
• Change the administrator
password of the source
whiteboard, and then also
change [Administrator Password
of Synchronization Source
Whiteboard] on the whiteboard
to be synchronized.
• Enter [Whiteboard Address of
Synchronization Source] and
[Administrator Password of
Synchronization Source
Whiteboard].
When You Cannot Use the Interactive Whiteboard As You Want
209