1. Touch [Paste] and touch the place on the screen to paste the cut or copied stroke.
You can perform this operation successively. Also, dragging the pasted stroke continuously,
you can move it.
2. Enlarge, reduce, or move the figure or stroke as you want.
For details, see page 39 "Enlarging, Reducing, or Moving the Strokes".
• The cut or copied strokes are saved temporarily until one of the following operations is performed:
• Another stroke is cut or copied.
• The machine is shut down.
• The machine enters standby mode.
• The whiteboard is closed.
• A remote whiteboard in compatible mode is opened.
Changing the Display Magnification/Moving the Display Area
You can change the display magnification of a displayed page or move the display area of an enlarged
page, either by directly touching the screen or by using a submenu accessed from the Loupe icon.
• When hosting or participating in a remote whiteboard session, the result of the operation you
perform is applied to all the devices.
Changing the display magnification using your fingers
When you change the display magnification or move the display area with your fingers, a zoom
navigator appears in the top center of the screen. The zoom navigator shows the area displayed on the
screen.
2. Using a Whiteboard
42
To Next Page
Loading...
