Changing the System Settings
You can configure the following settings on the "System Settings" window in Administrator Settings.
Item Description Initial value
Whiteboard Location Name To change the name, touch [Change]. Specifies
the name of the location where the machine is
installed. The location name can consist of a
string of 0 to 255 characters.
Blank
Update system from network
on startup
Specify whether or not to automatically update
the system when the whiteboard starts.
Selected
Check the Latest Version Touch [Check the Latest Version] to check if a
newer version of the system is available for
update on the network.
-
Display confirmation dialog
box before system update
Specify whether or not to show a confirmation
message before updating when [Update system
from network on startup] is selected.
Selected
Auto Shutdown Time Specifies the time interval before the machine
automatically shuts down.
If no operations are performed on the screen,
the machine will shut down automatically when
the set time interval elapses.
5 hours
Auto Restart Time Specifies the time at which the machine
automatically restarts.
If the setting is configured on the machine's
Web page, the setting becomes valid when the
machine restarts.
Auto restart occurs when the machine is in
standby mode. If [Auto Standby Time] is set to
[Off], the machine will not be automatically
restarted even if [Auto Restart Time] is set.
4:00
8. Changing the Interactive Whiteboard Settings
160
To Next Page
Loading...
