Configuring Wireless Network Settings
You can configure the following settings on the "Wireless Network Settings" window in Administrator
Settings.
When the configuration is complete, touch [Save settings by restarting]. The machine restarts
automatically.
• For details about how to configure a wireless network, see Windows 8 Help and the manual of the
device to be connected.
Item Description Initial value
Connect to access point etc. Configures the settings to connect to a network
node such as the access point.
Touch [Connect to access point etc.] to display
the list of access points that can be connected.
From the list, select the network name (SSID) to
which to connect, and then enter the network
security key to connect to the access point.
If the network name (SSID) of the access point
you want to connect to is not found on the list,
touch [Manually connect wireless network] to
open the configuration screen, and manually
configure the wireless network.
-
Manually connect wireless
network
Manually adds a wireless network
configuration.
To add a setting, touch [Manually connect
wireless network] to open the configuration
screen, and enter the following information of
the access point to connect:
• Network name
• Security type
• Encryption type
• Security Key
Also, select the following settings if necessary:
• [Start this connection automatically]
• [Connect even if the network is not
broadcasting]
-
8. Changing the Interactive Whiteboard Settings
134
To Next Page
Loading...
