You can approve a registration request from a contact to add them to your available contacts
list.
• Update firmware
You can update the RICOH UCS function firmware.
• This machine cannot perform the following operations when it is in RICOH UCS mode. If you need
to perform these operations, use RICOH Unified Communication System Settings.
• Changing account information
• Re-registering a password
• Registering a new contact or editing or deleting a contact
Installation Requirements
Preventing the deterioration of sound quality
• Keep objects that may cause the sound quality to deteriorate away from the microphone or
speaker.
• Blocking both the microphone and speaker may cause the sound quality to deteriorate.
• Do not place devices that generate noise, such as projectors or computers, near the machine.
• When using the machine in a room where sound echoes, try keeping your voice as low as
possible during meetings to avoid distracting echoes.
• Make sure there is sufficient space between this machine and the wall.
• Keep this machine away enough from the other party's device, for example, when the other
party's voice can be heard directly instead of through a speaker.
• Do not move the machine during a meeting.
• If you plan to use an external microphone and speaker, see the manual for details about how
to use the device.
• When using an external microphone speaker, keep it away from the air outlet of the machine.
• Placing an external microphone speaker too close to the air outlet can cause the audio quality
to deteriorate.
About network environment
• A poor network environment can cause delays in video streaming during meetings.
• When using a wireless network, communication quality may deteriorate or communication
may be lost, depending on the environment in which the machine is used. If these problems
occur, use a wired network instead. To switch to a wired network, you must first turn the
machine off and then turn it back on.
4. Connecting to a Video Conference
80
To Next Page
Loading...
