Opening Administrator Settings
• For security reasons, be sure to change the initial administrator password. If you do not change the
password, [Administrator Settings] is displayed on the Web page, but cannot be accessed. For
details about changing the administrator password, see page 128 "Administrator Settings".
1. On the top page of the machine's Web page, click [Administrator Settings].
2. Enter the administrator password in the password entry field.
3. Click [OK].
The configuration screen for the administrator appears. Confirm and modify the device settings as
required.
• If the administrator setting is configured on the machine's Web page, the setting becomes valid
when the machine restarts.
• If no operations are performed for 10 minutes, the configuration screen for the administrator will
disappear automatically.
• The administrator settings screen cannot be opened from the Web page while the administrator
settings are being configured on the control panel of the machine.
• You cannot login to [Administrator Settings] for 10 minutes after the Web page has been closed.
• For details about the administrator settings, see page 128 "Administrator Settings".
• Some settings cannot be configured from the Web page. Also, some settings such as the network
settings cannot be configured from the machine.
Opening Administrator Settings
95
To Next Page
Loading...
