Writing in line entry mode
Write freehand lines and arrows.
1. Touch , the Line Entry mode icon.
2. Select the color, thickness, and type of the line you are drawing.
3. Touch the screen surface with your finger, and move your finger while keeping your
finger on the screen surface.
A line or arrow that connects the start and end points is drawn.
• You cannot draw a line that is less than 10 mm in length.
Writing in stamp entry mode
Select and write a figure or stamp you want to use from the list.
1. Touch , the Stamp Entry mode icon.
2. Select the color and type of the figure or stamp you want to use.
Touch / to switch to a different figure or stamp list pages.
3. Touch the screen in the position you want. The selected figure or stamp is drawn in the
position you touched with your finger.
To move the position of the figure or stamp, keep your finger in contact with the screen surface after
touching the screen and drag your finger to the position you want.
4. Enlarge, reduce, or move the figure or stroke as desired.
For details, see page 39 "Enlarging, Reducing, or Moving the Strokes".
• You cannot select the thickness of the line when a stamp is being selected.
Deleting Strokes
This section explains how to delete written text and drawn figures. You can delete an individual stroke or
delete only the specified portions of a stroke.
Basic Operations
33
To Next Page
Loading...
