• You cannot draw a line that is less than 10 mm in length.
Writing in stamp entry mode
Select and write a figure or stamp you want to use from the list.
1. Touch , the Stamp Entry mode icon.
2. Select the color and type of the figure or stamp you want to use.
Touch / to switch to a different figure or stamp list pages.
3. Touch the screen in the position you want. The selected figure or stamp is drawn in the
position you touched with the pen nib.
To move the position of the figure or stamp, keep the pen nib in contact with the screen surface
after touching the screen and drag the pen to the position you want.
4. Enlarge, reduce, or move the figure or stroke as desired.
For details, see page 41 "Enlarging, Reducing, or Moving the Strokes".
• You cannot select the thickness of the line when a stamp is being selected.
Deleting Strokes
This section explains how to delete written text and drawn figures. You can delete an individual stroke or
delete only the specified portions of a stroke.
Deleting individual strokes
Deleting using the pen bottom
1. Move the pen bottom across a stroke to erase it.
Basic Operations
35
To Next Page
Loading...
