Message Causes Solutions
Cannot display copyright
protected contents on the
external input terminal
named "Computer In".
Connect to another external
input terminal and select the
input source by pressing
[Input] on the monitor or
remote control. The
whiteboard function cannot
be used on external input
terminals other than
"Computer In".
It was attempted to display
copyright-protected contents
from an external input
terminal that does not
support such contents.
Connect the source to the external
input terminal that supports copyright
protected contents, and try again. For
details about the external input
terminals, see page 75 "Devices That
Can Be Connected to the Machine".
Restart the whiteboard
Failed to switch the touch
input control.
The page will be restored
after restarting the
whiteboard.
Try again because the
function being performed
will be ended.
Do not turn the power off
while restarting.
Failed to switch the touch
input control.
Touch [Restart] to restart the
whiteboard.
An error has occurred
Failed to switch the touch
input control.
The setting will be ended.
Try again because the
function being performed
will be ended.
Failed to switch the touch
input control.
Touch [OK] to close the "Administrator
Settings" screen. If you want to
continue configuring the setting,
reopen Administrator Settings.
If a Message is Displayed during Operation
227
To Next Page
Loading...
