2. Switch the video output on the computer to display the computer screen on the screen of
the machine.
To switch between image outputs on the computer, press the appropriate function key while
holding down the [Fn] key.
The key combinations on computers from major computer manufacturers are as follows:
Examples of key combinations on computers from major computer manufacturers are as follows:
For details, see the manual of the computer that is being used.
Computer brand Key combination
MSI [Fn] + [F2]
Everex, Mitsubishi, NEC, Panasonic, Sotec [Fn] + [F3]
Gateway, HP [Fn] + [F4]
acer, SHARP, Sotec, Toshiba [Fn] + [F5]
Hitachi, IBM, lenovo, Sony [Fn] + [F7]
Asus, Dell, EPSON, Hitachi [Fn] + [F8]
Fujitsu [Fn] + [F10]
3. Write text or draw figures on the screen of the machine using a pen.
4. To capture the Whiteboard screen to a page, touch , the Import to Page icon.
The captured page is added at the end of the page list and displayed on the screen.
• When you start writing on the screen, a message prompting you to capture the screen appears.
You can capture the screen by touching [Import to Page]. To continue operation without
capturing the screen, close the message by touching [×]. You can choose whether to enable or
disable the message. For details, see page 137 "Changing the Detailed Settings".
• You can also write text or draw figures after importing a screen by touching , the Import to Page
icon.
• If there are already 100 captured pages, , the Import to Page icon, cannot be used.
• If there is a total of 90,000 strokes, fair copy entry text, figures, and stamps on all pages, you
cannot use the Import to Page icon.
• The "NO SIGNAL" message may be displayed while switching to an externally input image.
Connecting a Computer or Tablet to the Machine
81
To Next Page
Loading...
