Item Description Setting Method
3-07 Service calls (self-diagnostics) The service calls occurred are displayed
with the service call code
Press [3-07] of the data logging menu.
⇓
Move the page by Next/Prev. (If the
service calls are made for 30 or less
items, they can be covered in one page
and there is no page movement.)
* Clearing data
Press Clear key.
⇓
Select "YES (clear the data)/NO".
3-08 Operation time System operating time are accumulated
and displayed.
Display items
. Power ON
. Fusing lamp ON
. Main motor ON
. OPC motor ON
. Development motor ON
. Wire motor (wire cleaner motor) ON
* The display unit is one hour and
fractions are not displayed.
* Up to 8 digits are displayed.
Press [3-08] of the data logging menu.
Data Logging 1 July 1994
7-12
To Next Page
Loading...
