Ricoh IM C2000 Series User Manual

4. Select the [Notification of Results] check box.
DZX317
5. To send a notification e-mail to a destination other than the sender, press [Notification of
Results] on the [Settings] screen, and then specify the destination of the e-mail.
6. Configure the scan settings.
See "Sending a Fax at the Image Quality Suitable for the Original", User Guide (Full Version).
7. After configuring the send settings, specify the destination on the fax screen, and send the
fax.
page 89 "Basic Procedure for Transmitting Faxes"
See "Basic Procedure for Sending Internet Faxes" and "Basic Procedure for Sending IP-Faxes",
User Guide (Full Version).
Confirming the Information in Web Image Monitor
In Web Image Monitor, you can view up to 1,000 of the latest total results of the transmission and
reception history.
1. Log in to Web Image Monitor as the administrator.
See "Logging in to Web Image Monitor", User Guide (Full Version).
Viewing the Transmission Result of Sent Faxes
101

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi