Ricoh IM C2000 Series User Manual

Viewing the Transmission Result of Sent Faxes
You can check the result of a fax transmission on the fax screen, in various reports, or on the screen of a
computer.
The following reports are printed according to the transmission result or the settings:
• Communication Result Report: The result of Memory Transmission is printed.
• Immediate TX Result Report: The result of Immediate Transmission is printed.
• Communication Failure Report: This report is printed when a fax could not be sent to all specified
destinations by Memory Transmission.
• Error Report: This report is printed when sending a fax by Immediate Transmission failed.
• Memory Storage Report: This report is printed when the scanned document could not be stored in
the memory.
• The fax transmission results can also be confirmed in Records.
• See "Viewing the History of Sent and Received Faxes", User Guide (Full Version).
• Specify [Notification of Results] when sending a fax to receive the transmission result by e-mail.
• See "Checking by E-mail", User Guide (Full Version).
Confirming the Information on the Fax Screen
Press [Job Status] [Transmission File Status] on the fax screen to view the information.
1. Press [Fax] on the Home screen.
2. Press [Job Status] on the fax screen.
DZC304
Viewing the Transmission Result of Sent Faxes
97

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi