Ricoh IM C2000 Series User Manual

Names and Functions of the Control Panel
The touch panel (Smart Operation Panel) that displays the operation screen of the machine is referred to
as the "Control Panel".
• On both sides of the control panel, interfaces for connecting external devices and slots to insert an
SD card/USB flash memory device are provided.
• Even when the screen is turned off, the LED indicators on the frame of the control panel show the
status of the machine.
Touch Panel/Interface
DZB165
3
21
1. Media slots
Insert an SD card or USB flash memory device. You can store the scanned data or print the file stored on the
media.
• Use an SD memory card or SDHC memory card with a maximum capacity of 32 GB. You cannot use an
SDXC memory card.
• Use the media formatted in FAT16 or FAT32.
• Certain types of USB flash memory devices cannot be used in the machine.
• A USB extension cable, hub, or card reader cannot be used.
• If the power of the machine is turned off or the media is removed from the machine while the machine is
reading the data in the media, check the data in the media.
• Before removing the media from the slot, press the icon displayed on the screen ( / ) to cancel the
connection.
1. Getting Started
20

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi