Name: Ricoh IM C2000 Series
Brand: Ricoh
Rating: 4 (1 reviews)

To Next Page

To Previous Page

• Perforated or torn originals

• Curled, folded, or creased originals

• Pasted originals

• Originals with adhesive tape, glue or paste stuck to them

• Originals with any kind of coating, such as thermal paper, art paper, aluminum foil,

carbon paper, or conductive paper

• Originals with perforated lines

• Originals with indexes, tags, or other projecting parts

• Sticky originals such as translucent paper

• Thin or highly flexible originals

• Thick originals such as postcards

• Bound originals such as books

• Transparent originals such as transparencies or translucent paper

page 58 "Placing an Original on the Exposure Glass"

• When loading an original written by pencil on the ADF, the original may be dirty from by

being scraped.

• Correct an original that tends to curl before setting on the machine.

• Take care so that multiple originals do not stick to each other and are not fed at once.

• Do not set an original that is wet with correcting fluid or ink. The scanning glass will be stained

and the stain will be scanned with the original.

Placing Originals in the ARDF

• Do not block the sensors with your hand. Be sure to load the originals neatly and do not push them

into the ADF forcibly. It may cause paper misfeeds or paper size error.

DZW106

Placing an Original in the Auto Document Feeder (ADF)

Questions and Answers:

Need help?

Do you have a question about the Ricoh IM C2000 Series and is the answer not in the manual?

Ricoh IM C2000 Series Specifications

General