Ricoh IM C2000 Series User Manual

Installing the Printer Driver for Network
Connection (OS X/macOS)
Install the PPD file (printer driver) under OS X/macOS, and then register the machine on the computer
from the system preferences.
Installing the PPD file
1. Set the CD-ROM in the computer, and click [macOS] to display the [macOS PPD Installer]
folder.
To install the driver from the downloaded file, display the folder that is the location of the
downloaded file.
2. Double-click the package file.
DZX684
• To install from the CD-ROM, double-click the package file in the [macOS] [macOS PPD
Installer] folder.
• When the install confirmation screen is displayed, click [Continue].
3. On the "Introduction" screen, click [Continue].
4. On the "License" screen, click [Continue] and then click [Accept].
• When prompted to select where to install the driver, specify the install location, and click
[Continue].
Installing the Printer Driver for Network Connection (OS X/macOS)
119

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi