Ricoh IM C2000 Series User Manual

Icon Condition Solution and reference
The hole punch receptacle is full. Empty the receptacle.
See "When the Hole Punch Receptacle is
Full", User Guide (Full Version).
A cover is open. Check that all covers of the machine and
options are closed.
• For the names and the contact information of consumables, check [Settings] [Inquiry]. Press
[Home] ( ) after completing the operation to close [Settings].
• See "Contact Information", User Guide (Full Version).
When the [Check Status] Indicator is lit or flashing
The [Check Status] indicator notifies the user when the machine requires immediate attention.
Flashing in red
The machine is unavailable for use. Press [Check Status] and resolve the problem as soon as
possible.
Flashing in yellow
Maintenance on the machine needs to be performed soon. Perform the required procedure
accordingly.
You can display the status confirmation screen with [Check Status]. On the screen, check the detailed
status of the machine or application.
1. Press [Check Status].
DZC703
2. Press [Check] to check the details, and perform the required procedure.
page 225 "When an Icon is Displayed with a Message"
Checking the Indicators, Icons, and Messages on the Control Panel
227

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi