Ricoh IM C2000 Series User Manual

Specifying the File Type or File Name When
Scanning a Document
Specify the settings in [Send Settings] on the scanner screen.
1. Press [Scanner] on the Home screen.
2. Place the original on the scanner.
See "Placing an Original to Scan", User Guide (Full Version).
3. Press [Send Settings] on the scanner screen.
4. Press [File Type], and select the file type to save the scanned document.
Press [Others] to display the detailed settings screen.
• TIFF/JPEG (Single Page): A separate image file is created for each single page.
• When you specify Black & White in [Original Type], the scanned document will be sent
in TIFF format.
• When you specify Gray Scale or Full Color in [Original Type], the scanned document
will be sent in JPEG format.
• TIFF (Multi-page): Multiple pages are combined into a single image file.
• PDF (Single Page): A PDF file is created for each single page.
• PDF (Multi-page): Multiple pages are combined into a single PDF file.
In addition to the normal PDF format, you can also specify [High Compression PDF] which reduces
the file size while maintaining the legibility, or [PDF/A] which conforms to the international
standard and is suitable for long-term storage.
5. To specify the file name, press [File Name] and enter the file name.
The file name is generated by combining the following three items:
5. Scan
162

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi