Ricoh IM C2000 Series User Manual

Replacing the Waste Toner Bottle
The waste toner bottle needs to be replaced soon when the "Waste Toner Bottle is almost full." message
is displayed. Prepare a replacement waste toner bottle.
See "Contact Information", User Guide (Full Version).
See the video displayed on the control panel of the machine for the procedure to replace the waste
toner bottle.
1. Press [Watch Video].
DZC630
To display this screen again, press [Confirm] in the system message widget or press [Check Status]
and then press [Check] under "Mach. Status" on the [Mach./Applic. Stat] tab.
2. Press the play key.
DZC635
3. Replace the waste toner bottle by following the procedure shown in the video.
Precautions When Replacing the Waste Toner Bottle
• Do not store toner (new or used) or toner containers while toner is inside in a place with an open
flame. The toner can ignite and result in burns or fire.
8. Adding Paper and Toner
220

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi