Ricoh IM C2000 Series User Manual

Message Cause Solution and reference
"Cannot find the
specified path. Please
check the settings."
The machine or the
computer is not
connected to the
network correctly.
Check that the machine or the computer is
connected to the network correctly. For details
about your network environment, consult the
network administrator.
The computer name or
folder name specified in
the path name is
incorrect.
Register the computer name and folder name
again.
The firewall function is
enabled on the
computer.
In the firewall function on the computer,
register the machine IP address and the port to
use for sending files as exceptions.
You can check the IP address in [Check Status]
"Network". For details about the ports, see
the following:
page 298 "List of Specifications"
"Check original's
orientation."
The original is placed in
the wrong orientation.
Depending on the combination of the specified
settings, the orientation to set the original
differs. Be sure to place the original in the
correct orientation.
See "Placing an Original to Scan", User Guide
(Full Version).
When a Message Is Displayed While Using the Scanner Function
273

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi