Message Cause Solution and reference
"Classification
Code is incorrect."
A classification
code is not
specified.
Consult the machine administrator for the classification
code, and enter the code in [Classification Code] in
[Detailed Settings] on the [Basic] tab [Modify] under
[Job Type] in the printer driver.
The document was
printed in a printer
driver that does
not support the
classification code.
Request the machine administrator to change the setting of
the classification code. Machine administrator: Change
[Classification Code] to [Optional] in Web Image
Monitor if necessary.
See "Managing the Number of Printed Sheets Using the
Classification Code", User Guide (Full Version).
"Collate has been
cancelled."
The sort function
was canceled.
Turn off the power of the machine, wait for 10 seconds or
more after confirming that the main power indicator is
turned off, and then turn on the power.
page 13 "Turning On and Off the Power"
"Command Error" A problem
occurred in the
data because of
the communication
status or another
reason.
Check that the machine can communicate with the
computer properly.
A printer driver
that does not
support the
machine was used.
Use the printer driver for the machine. Obtain and install
the latest version of the driver.
The print command
did not complete
correctly.
In the printer driver, specify [Edge Smoothing] on the
[Others] tab [Special Settings].
"Communication
error with central
management
server has
occurred. The job
has been
cancelled."
The job was
canceled because
a Central
Management
communication
error occurred.
Check the status of the Central Management machine.
When a Message Appears While Using the Printer Function
281
To Next Page
Loading...
