Adjustments
SM 4-153 M065/M066
Replacement
and
Adjustment
You can adjust 15 points for each color: (example [A]) between 0 (lowest density) [B] and
255 (highest density) [C]. For each point, you can adjust the density within 0 and 255.
The gradation scales marked "Default" are printed according to the default gamma settings
in the flash ROM in the controller. The gamma adjustment changes the densities at the
adjustable points in the gradation scale. The gradation scale marked "Current" shows the
current settings.
Compare the "Current" gradation scale with the "Default" at the time you do the adjustment
procedure. Select the density for each of the 15 adjustable points, excluding points 0 and
255, from the "Default" gradation scale.
The NVRAM holds three sets of controller gamma settings:
Those saved this time: Controller SP 1101 ToneCtlSet - Tone (Current)
Those saved in the previous adjustment: Controller SP 1101 ToneCtlSet - Tone (Prev)
The factory settings: Controller SP 1101 ToneCtlSet - Tone (Factory).
To Next Page
Loading...
