Ricoh M065 - Selecting the Panel Display Language; Turning Power on

Printer Installation
M065/M066 2-12 SM
Turning Power On
 Turn off the power switch whenever you plug in and unplug the power cord.
1. Make sure that the power switch is set to "Off".
2. Plug in the machine.
3. Turn on the power switch.
 Do not turn off the power switch until initialization is completed ("Ready"
appears on the display when initialization is completed). Otherwise, the
machine may malfunction.
Selecting the Panel Display Language
 You can select one of these languages (the default is English): English, German,
French, Italian, Dutch, Swedish, Norwegian, Danish, Spanish, Finnish, Portuguese,
Czech, Polish or Hungarian.
 You do not have to do this procedure if you use English. Do this procedure if you
want to use a different language.
1. Turn on the power switch of the printer.
 "Ready" shows on the panel display after the machine warms up.
2. Press the "Menu" key.
3. Press the "
" or " " key to select "Language."
4. Press the "OK" key.
5. Press the "
" or " " key to select the language you want.
6. Press the "OK" key.
7. Press the "Menu" key to return to the initial screen.