Printer Installation
SM 2-11 M065/M066
Installation
5. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters. Excessive
movement of loaded paper can cause edges of sheets to snag on the
openings of the tray's lifting plate, resulting in sheets being folded or becoming
jammed.
When adjusting the paper width, use the right side guide only, with the green
clip. Do not hold the left side guide at this time, or skew will occur.
6. Lift the front of the paper tray, and slowly slide the paper tray back until it stops. Make
sure that the paper tray is fully inserted to prevent paper jams.
To Next Page
Loading...
