Paper Feed Unit (M384)
SM 2-17 M065/M066
Installation
2.4 PAPER FEED UNIT (M384)
For details, refer to the "Hardware Guide" for this machine.
Install the caster table and securing bracket if the machine is installed on the floor
(
p.2-19 "Caster Table (M393)").
1. Remove the tape from the paper feed unit.
2. Lift the machine with four people by using the inset grips on both sides of the machine.
3. Align the machine with the two upright pins on the paper feed unit and then lower the
machine slowly.
To Next Page
Loading...
