Ricoh M065 - Page 263

Firmware Update
SM 5-13 M065/M066
System
Maintenance
Reference
Code Meaning Solution
35
Module mismatch – Module on
SD card is not for this machine
SD update data is incorrect. The data on the
SD card is for another machine. Acquire
correct update data then install again.
36
Cannot write module – Cause
other than E34, E35
SD update data is incorrect. The data on the
SD card is for another machine. Acquire
correct update data then install again.
40 Engine module download failed
Replace the update data for the module on
the SD card and try again, or replace the
BCU.
42
Operation panel module
download failed
Replace the update data for the module on
the SD card and try again, or replace the
LCDC.
43
Stamp data module download
failed
Replace the update data for the module on
the SD card and try again, or replace the hard
disks.
44
Controller module download
failed
Replace the update data for the module on
the SD card and tray again, or replace
controller board.
50
Electronic confirmation check
failed
SD update data is incorrect. The data on the
SD card is for another machine. Acquire
correct update data then install again.