Ricoh M065 - Page 334

SC Tables
M065/M066 3-24 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
520 B 2nd paper tray cooling fan error (optional paper feed unit)
521 B 3rd paper tray cooling fan error (optional paper feed unit)
522 B 4th paper tray cooling fan error (optional paper feed unit)
- -
The motor lock signal error from the cooling fan is detected for 10
seconds after turning on the cooling fan.
 Disconnected harness of the cooling fan
 Defective cooling fan
 Defective BCU
1. Check or replace the harness of the cooling fan.
2. Replace the cooling fan.
3. Replace the BCU.
No. Type
Details (Symptom, Possible Cause, Troubleshooting
Procedures)
530 D Development fan 1 error
531 D Development fan 2 error
The motor lock signal error is detected for 10 seconds after
the motor lock signal was first detected.
 Defective development fan 1 or development fan 2
 Disconnected or defective harness
 Defective BCU
1. Check or replace the harness.
2. Replace the development fan 1 (SC530) or development
fan 2 (SC531).
3. Replace the BCU.