SC Tables
M065/M066 3-56 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
881
CTL
D
Management area error
This is a software error than can occur:
At login
When a print job was received
When WEB browser was opened
Cycle the machine off/on.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
899
CTL
D
Software error
A software error occurred in the GW controller.
Cycle the machine off/on
Update controller firmware
Controller board defective
To Next Page
Loading...
