Ricoh M065 - Page 642

System Service Mode
M065/M066 8-232 SM Appendix
5169
[CE Login]
If you will change the printer bit switches, you must 'log in' to service mode with
this SP before you go into the printer SP mode.
001 - *CTL
[0 or 1 / 0 / - ]
0: Disabled
1: Enabled
5186
[RK 4 Disconnect Operation]
Enables or disables the prevention for RK4 (accounting device) disconnection.
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)",
the machine automatically jams a sheet of paper and stops.
001 - *ENG
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5195 [Limitless SW] DFU
001
- *CTL
[0 or 1 / 1 / -]
0: Productivity priority
1: Tray priority
Selects the paper feed mode.
Productivity priority:
This changes the feeding tray as soon as the machine detects the priority tray
even the paper still remains in the feeding tray.
Tray priority:
This changes the feeding tray after the paper in the tray where the machine
has been feeding paper has been run out of.
This SP is activated only when a customer selects the "Auto Paper Selsct".