Ricoh M065 - Page 645

System Service Mode
SM Appendix 8-235 M065/M066
Appendix:
SP Mode
Tables
5401
[Access Control]
When installing the SDK application, SAS (VAS) adjusts the following
settings. DFU
104
Authentication Time *CTL [0 to 255 / 0 / 1 second]
Specifies the time for the authentication timeout.
0 = 60 seconds, 1 to 255 = displayed time (seconds)
162
Extend Certification
Detail
*CTL
Selects the log out type for the extend
authentication device.
Bit 0: Log-out without an IC card
0: Not allowed (default)
1: Allowed
200 SDK1 Unique ID *CTL
"SDK" is the "Software Development Kit".
This data can be converted from SAS
(VAS) when installed or uninstalled.
(DFU)
201
SDK1 Certification
Method
*CTL
210 SDK2 Unique ID *CTL
211
SDK2 Certification
Method
*CTL
220 SDK3 Unique ID *CTL
221
SDK3 Certification
Method
*CTL
230
SDK certification device *CTL -
 Bit 0: SDK authentication
0: Off (Default), 1: On (SDK authentication enabled)
Selects the SDK authentication setting.
 Bit 2: Administrator log in setting
0: Off (Default), 1: On