System Service Mode
M065/M066 8-274 SM Appendix
016 Fusing Unit *ENG
Displays or does not display the
end display for the fusing unit.
This SP is activated only when
the SP5930-001 is set to "1".
[0 or 1 / 1 / -]
0: OFF, 1: ON
5987 [Mech. Counter Protection]
001 0: OFF / 1: ON
This SP detects that a mechanical counter device
is removed. If it is detected, SC610 occurs.
5990
[SP print mode]
Prints out the SMC sheets.
001 All (Data List) -
-
002 SP (Mode Data List) -
004 Logging Data -
005 Diagnostic Report -
006 Non-Default -
024 SDK/J Summary -
025 SDK/J Appli.Info -
To Next Page
Loading...
