Tray Heater
M065/M066 2-36 SM
9. If you do not install another optional paper feed unit, replace the screw [A] with the
screw [B] (
x 1 (M3x8) [C], spring washer x 1 ( 3) [D], washer x 1 ( 3) [E]).
Do steps 10 and 11 if you install another optional paper feed unit below M384. If
not, go to step 12.
10. Bracket [A] ( x 1)
11. Install the relay harness [A] as shown above.
Repeat steps from 1 to 11 if two or three optional paper feed units are to be
To Next Page
Loading...
