Test Pattern Printing
SM 5-46 D245/D246/D247
5.4 TEST PATTERN PRINTING
Some of these test patterns are used for copy image adjustments but most are used primarily for
design testing.
Do not operate the machine until the test pattern is printed out completely. Otherwise, SC
will occur.
1. Press the [User Tools] key.
2. Select “Print List/Report” from the list then press the [OK] key.
3. Select “Test Page” or “Registration Page” for print from the list then press the [OK]
key.
4. Press [Yes] to print the selected pattern.
To Next Page
Loading...
