Ricoh MP 2014AD - Sc Code Descriptions; Sc1 Xx: Scanning

SC Code Descriptions
SM 6-2 D245/D246/D247
6.2 SC CODE DESCRIPTIONS
6.2.1 SC1XX: SCANNING
SC No. Level Error Name/Error Condition/Major Cause/Solution
101-01 B Lamp error (scanning)
The white level peak did not reach the prescribed threshold
when the white plate was scanned.
 CIS defective
 MPU defective
 Harness defective
 Condensation in the scanner unit
 CIS dirty or positioned incorrectly
 White plate dirty or positioned incorrectly
1. Perform the following operations.
 Reconnect the harness of the CIS.
 Reattach or clean the CIS.
 Reattach or clean the white plate.
2. Replace the following parts.
 Replace the CIS.
 Replace the MPU.
 Replace the harness of the CIS.
SC No. Level Error Name/Error Condition/Major Cause/Solution
102-00 B LED light adjustment error
The white peak exceeded the prescribed threshold when the
white plate was scanned after a specified number of
adjustments.
 CIS defective.
 MPU defective
 Harness defective