Ricoh MP 2014AD - Sc9 Xx: Controllers

SC Code Descriptions
SM 6-35 D245/D246/D247
Troubleshooting
6.2.8 SC9XX: CONTROLLERS
SC No. Level Error Name/Error Condition/Major Cause/Solution
903-00 B Total counter error
 If the counter values (4 bits) for the machine and mirroring
agree, the SUM value of the machine is recalculated, and it
does not agree with the SUM value of upper 4 bits, this SC
is issued.
 If the counter values (4 bits) for the machine and mirroring
do not agree, recalculate the SUM values for the machine
and mirroring. If the values for both machine and mirroring
do not agree with the SUM value of upper 4 bits, this SC is
issued.
EEPROM defective
Replace the EEPROM.
SC No. Level Error Name/Error Condition/Major Cause/Solution
990-00 B Fail-safe SC
 An unexpected error occurred on the software.
System error
Update the firmware.