Ricoh Pro 8320 - Perfect Binder: Thrust Plate Operation Error; Perfect Binder: Trimmings Buffer Motor Rotation Error; Sc750-45; Sc750-46

1.SC Codes
332
 Replace the sensor harness.
 Clear the signature jam.
SC750-45
Error Name
Perfect Binder: Trimmings Buffer Motor Rotation Error
Pattern
D
Error Condition
No encoder lock input was received within 50 ms during operation.
Major Cause
 Trimmings buffer motor defective
 Trimming buffer encoder sensor defective
 Overload
 Connector damaged or defective
 Buffer full of trimmings
Solution
 Reconnect the connector.
 Replace the trimming buffer motor.
 Replace the trimming buffer encoder sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-46
Error Name
Perfect Binder: Thrust Plate Operation Error
Pattern
D
Error Condition
The thrust press plate sensor does not go OFF after the trimmings buffer moved to the left for 3 sec.
(blocked by jammed trimming scraps).