5.Other Information
859
2. Loosen (do not remove) both screws [B].
3. Move lever [A] to the desired notch, and then tighten both screws [B].
4. Return to Step 5 (under the main Solution procedure above), and then execute the forced
lubricant belt cleaning (SP2-310-001) and the steering control position setting (SP2-920-002).
Left Steering Plate Scale Adjustment Example
The setting for SP2-920-002 (Steering Control Roller Stable Position of Steering Roller) was "+80", so
the right steering plate was adjusted to "+3".
Countermeasures for Other SC Codes
These are countermeasures for solving other mechanical problems with the recurrence of SC741 series
codes that may occur during these troubleshooting procedures.
Belt Position Ready Timeout
The machine issues this error during normal operation when ITB steering control fails to
move the belt within the 400 sec. prescribed by SP2-920-013 (SP 2-920-013: Steering
To Next Page
Loading...
