2.Image Quality Problems
666
Density Problems
Uneven Image Density
The density is uneven.
Solution:
Depending on the type of unevenness, the solution is different. Refer to the table below.
(A) The density is uneven across the entire image.
The density
from top to
bottom is
uneven.
1. On the Adjustment Settings for Skilled Operators menu, select Machine:
Image Quality > Adjust Image Density > Image Density Adjustment: Manual
Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)
2. If the problem persists, carry out the procedure for uneven density from top to
bottom. (Uneven Density from Top to Bottom)
The sides are
fainter or
denser.
1. On the Adjustment Settings for Skilled Operators menu, select Machine:
Image Quality > Adjust Image Density > Image Density Adjustment: Manual .
Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)
2. If the problem persists, consult the product specialist.
The top and
bottom are
fainter or
denser.
1. On the Adjustment Settings for Skilled Operators menu, select Machine:
Image Quality > Adjust Image Density > Image Density Adjustment: Manual
Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)
2. If the problem persists, consult the product specialist.
To Next Page
Loading...
