Changing the IP Address (LAN2 Port)
25
2
S Click [] on the web browser.
The web browser closes.
Note
❒ Procedures to close web browser may differ according to your Operating
System and web browser. Proceed according to your environment.
T Restore the network settings of your computer according to the setting in-
formation in Step
C
of this section.
Important
❒ If you change the equipment's IP address, this step is essential for re-estab-
lishing connection with the equipment.
U Disconnect the network cable from the LAN1 port of this equipment.
-When using the equipment in a DHCP environment
Obtain an IP address from the DHCP server by connecting to the network via
the LAN2 port after step R. When the equipment has rebooted, follow steps H to
L with the computer connected to the LAN1 port. Make a note of the IP address
when you receive it from the DHCP server (step M). In step M, click [Top Page],
and then proceed from step T.
To Next Page
Loading...