Inform the Requesting Party of the SUB Code assigned to the Transfer Box. When they want to have a
document transferred by your machine, ask them to send the document using SUB Code Transmission
and specify this SUB Code. If a password has also been programmed, inform them of this too, and ask
them to enter it as the SID code.
You can store the following items:
• Box Name (required)
Up to 20 characters.
• SUB Code (required)
Up to 20 characters long and can be composed of digits [0]-[9], [ ], [ ], and spaces (the first
character cannot be a space).
• End Receiver (required)
You can store five End Receivers (destinations to which documents are forwarded) for each box.
Specify End Receivers using a single or group destination programmed in the destination list
beforehand.
• Password (optional)
Up to 20 characters long and can be composed of digits [0]-[9], [ ], [ ], and spaces (the first
character cannot be a space).
When programming a password, a mark is displayed in front of the Box name.
1. Press [Facsimile Features].
2. Press [General Settings].
3. Press [Box Setting].
4. Check that [Program / Change] is selected.
Box Settings
407
To Next Page
Loading...
