10. Specify End Receivers with Destination keys, and then press [OK].
Press the transmission type tab to switch the destination between fax number, Internet Fax
destination, e-mail address, and folder destination.
IP-Fax destination appears in the fax destination list.
A reception station can also be registered as a group destination. In such a case, a maximum of
498 parties including End Receivers 1-5 can be specified in a group.
11. To program a password, press [Password].
If you do not want to program a password, proceed to step 14.
12. Enter a password, and then press [OK].
If you make a mistake, press [Clear] before pressing [OK], and then try again.
13. Re-enter the password, and then press [OK].
If you make a mistake, press [Clear] before pressing [OK], and then try again.
To change the password after pressing [OK], press [Password] and repeat steps 12 and 13, or
press [Cancel] and repeat from step 11.
14. Press [Security].
If not specifying the security function, proceed to step 17.
Security is set to use S/MIME authentication. For details about the security settings, consult your
administrator.
15. Select the security functions.
Box Settings
409
To Next Page
Loading...
