Rigol DS1104Z Plus Programming Guide

Chapter 2 Command System RIGOL
MSO1000Z/DS1000Z Programming Guide 2-23
:CURSor:MANual:IXDELta?
Syntax
:CURSor:MANual:IXDELta?
Description
Query the reciprocal of the absolute value of the difference between the X values of cursor
A and cursor B (1/|dX|) in the manual cursor measurement mode. The unit depends on
the horizontal unit currently selected.
Return
Format
The query returns 1/|dX| in scientific notation.
Example
:CURSor:MANual:IXDELta? /*The query returns 1.250000e+05*/
Related
Commands
:CURSor:MANual:AX
:CURSor:MANual:BX
:CURSor:MANual:TUNit
:CURSor:MANual:YDELta?
Syntax
:CURSor:MANual:YDELta?
Description
Query the difference between the Y values of cursor A and cursor B (BY-AY) in the manual
cursor measurement mode. The unit depends on the vertical unit currently selected.
Return
Format
When the signal source is CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH, the query
returns the difference in scientific notation; when the signal source is LA, the query
returns 4294967295.
Example
:CURSor:MANual:YDELta? /*The query returns -4.000000e+00*/
Related
Commands
:CURSor:MANual:AY
:CURSor:MANual:BY
:CURSor:MANual:VUNit

Rigol DS1104Z Plus Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Timebase Range	5 ns/div to 50 s/div
Connectivity	USB Host, USB Device, LAN, AUX
Vertical Resolution	8 bits
Power Supply	100-240 V AC, 45-440 Hz
Display	7 inch TFT LCD
Trigger Types	Edge, Pulse, Video, Slope
Input Impedance	1 MΩ ± 2%