Rigol DS2302A Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-85
:CURSor:TRACk:AXValue?
:CURSor:TRACk:AYValue?
Syntax
:CURSor:TRACk:AXValue?
:CURSor:TRACk:AYValue?
Description
Query the X or Y value at cursor A in track cursor measurement.
Explanation
 For the horizontal position of cursor A, refer to the
:CURSor:TRACk:CAX command.
 For the vertical position of cursor A, refer to the
:CURSor:TRACk:CAY? command. The unit is
determined by the unit (refer to the
:CHANnel<n>:UNITs command) selected by the signal source
(refer to the
:CURSor:TRACk:SOURce1 command) of cursor A.
Return Format
The query returns the value in scientific notation.
:CURSor:TRACk:BXValue?
:CURSor:TRACk:BYValue?
Syntax
:CURSor:TRACk:BXValue?
:CURSor:TRACk:BYValue?
Description
Query the X or Y value at cursor B in track cursor measurement.
Explanation
 For the horizontal position of cursor B, refer to the
:CURSor:TRACk:CBX command.
 For the vertical position of cursor B, refer to the
:CURSor:TRACk:CBY? command. The unit is
determined by the unit (refer to the
:CHANnel<n>:UNITs command) selected by the signal source
(refer to the
:CURSor:TRACk:SOURce2 command) of cursor B.
Return Format
The query returns the value in scientific notation.

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English