Rigol DS2302A - Page 120

RIGOL 2 Command System
2-104 MSO2000A/DS2000A Programming Guide
:FUNCtion:WANalyze:SOURce
Syntax
:FUNCtion:WANalyze:SOURce <sour>
:FUNCtion:WANalyze:SOURce?
Description
Set or query the channel source for the waveform analysis.
Parameter
Name Type Range Default
<sour> Discrete {CHANnel1|CHANnel2} CHANnel1
Note: Only channel currently enabled can be selected as the channel source.
Return Format
The query returns CHAN1 or CHAN2.
:FUNCtion:WANalyze:FCURrent
Syntax
:FUNCtion:WANalyze:FCURrent <NR1>
:FUNCtion:WANalyze:FCURrent?
Description
Set or query the current frame of waveform analysis.
Parameter
Name Type Range Default
<NR1> Integer
1 to the maximum number of
frames recorded
1
Return Format
The query returns an integer.