Rigol DS2302A Programming Guide

RIGOL 2 Command System
2-306 MSO2000A/DS2000A Programming Guide
:TRIGger:SHOLd:TYPe
Syntax
:TRIGger:SHOLd:TYPe <type>
:TRIGger:SHOLd:TYPe?
Description
Set or query the hold type of setup/hold trigger.
Parameter
Name Type Range Default
<type> Discrete {SETup|HOLd|SETHOLd} SETup
Explanation
 SETup: set the time (refer to the
:TRIGger:SHOLd:STIMe command) that the data stays stable and
constant before the clock edge appears.
 HOLd: set the time (refer to the
:TRIGger:SHOLd:HTIMe command) that the data stays stable and
constant after the clock edge appears.
 SETHOLd: set the time (refer to the
:TRIGger:SHOLd:STIMe and :TRIGger:SHOLd:HTIMe
commands) that the data stays stable and constant before and after the clock edge appears.
Return Format
The query returns SET, HOL or SETHOL.

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English