112
Display and Audio
SD
Bluetooth
Aux in
Sleep
Alarms
System settings
Main menu
Backlight
Equaliser
Network
Time/Date
Inactive Standby
Language
System settings
2-4 2-4
1,4
2-4
4
3
2
1
Off
Standby
*
Brightness control
The brightness of the display can be adjusted for when the sound system is in
standby and for when it is in use. If you use the unit in the bedroom, you may prefer
a lower standby brightness level than the standard setting. There are a range of
Standby brightness levels and a range for when the sound system is in use. To
change the current brightness setting, please follow these steps.
1. Press the On/Standby button to switch on your sound system. To access the
menu for the current mode press and hold the Menu button.
2. Press the Menu Up or Down buttons until 'System settings' is highlighted on
the display. Press and release the Select button to enter the System Settings
menu.
Press the Menu Up or Down buttons until 'Backlight' is highlighted on the
display. Press and release the Select button
3. To adjust the display brightness when the sound system is switched on press
the Menu Up or Down buttons until 'Normal' is highlighted on the display.
To adjust the display brightness when the sound system is in standby press
the Menu Up or Down buttons until 'Standby' is highlighted.
Press and release the Select button to enter the selected brightness adjustment
mode. The current setting will be marked with an asterisk.
4. Press the Menu Up or Down buttons to choose the desired brightness level.
Press and release the Select button to set the level. Press the Menu button
to exit.
When the radio is in Standby mode, pressing a button will cause the sound system
to switch to the normal brightness level for a few seconds. This is so that even if the
standby brightness level is set low, it is still possible to see the time when needed.
The settings in Standby mode are lower than their equivalents when the sound
system is in use.
4
3
2
1
Normal
*
To Next Page
Loading...
